Create an amplifier from the music center do it yourself

If you think about it, then in our apartment there will be a lot of old equipment, which is a pity to throw out and leave - it takes up space and collects dust. There are so-called "life hacks" (household tricks) that will help us connect the old equipment to the case. So from the old music center you can make a good amplifier for new technology with your own hands. To do this, do not need any special knowledge of electronics or special devices.

What technology to connect

Today, in any apartment there is a technique for playing audio or video. However, not every one of them is capable of transmitting sound quality in the same way as the old and familiar musical instruments do. So, where can I use a not relevant now music center?

  1. You can use the system as speakers to enhance the sound on the phone.
  2. You can connect a tablet to the center and enjoy loud and high-quality sound.
  3. You can use the device as a speaker for the TV.
  4. You can connect a computer to the music center, and watch videos or listen to songs in excellent sound.
  5. If you are not satisfied with the sound on the laptop, then the audio system will come to the rescue.

The old audio system can serve you more than one year, while you will enjoy high-quality sound. I am glad that you can connect it to any digital device in the apartment.

How to connect an amplifier

To make an amplifier from an old audio system, follow the instructions below. There is nothing difficult in connecting the system, you just need some extras:

  1. To get started, look at your device. On its back there are connectors for connecting a special cable. The cord for connecting the music center with any technique is called a "tulip". He received this name because of the branching into three colors: white, red and yellow.
     AUX output on the music center panel
  2. When choosing a tulip, explain to the seller for what purposes it will be used. So you can not go wrong with the purchase.Most likely, he will ask you to name the manufacturer and model of the system and device for which you need an amplifier.
     Tulip Plugs

  3. After you find the colored inputs, insert the plugs from the cord into their sockets. It is possible to determine which and where to insert by color, they just need to be correlated.
     Tulip Connectors

  4. Connect the other end of the cord to a device that needs sound amplification.
     Connecting to a laptop or computer
  5. The procedure is almost complete, you only need to configure the device. The correctness of the setting does not depend on the specific brand or model. It is only necessary to switch the music center to the "aux" mode. Done, now you can enjoy high-quality sound.
     AUX mode in the music center

You can perform such an operation only if the technique used is fully functional.

If it does not work, then you can try to disassemble the device and get the gain board out of it. However, for its connection to the technique it is necessary to have specific knowledge.

Conclusion

Hopefully, we have managed to give you an answer to the question of how to make an amplifier from a stereo system. This idea is not only practical, but also original. In addition, for its implementation does not require any additional knowledge and large investments.All you need to do is to buy a cord to connect and enjoy how the old equipment gets a new life.

Comments: 0
Continuing the theme:
Ratings

What are the criteria for choosing the best music centers. Analysis of the main advantages and disadvantages of several devices of this type, general recommendations for their choice. What should pay special attention.

Video camera

Home cinema

Music Center