Dishwasher salt functions

When buying a dishwasher, consumers think that a single detergent is enough to operate the equipment. After reading the instructions, many understand that this is not quite true. In order for the appliance to wash dishes of high quality and serve for a long time, salt for dishwashers is necessary. Immediately additional questions arise: what is the use of this tool? How much to put sodium chloride and where? Why do I need salt for a dishwasher? Answers to exciting questions will give in our review. However, before we figure out what the composition of a specialized tool.

 Salt

The composition of salt for dishwashers

Many ordinary people with this word represent table salt, which is used in cooking.However, these are two different chemical compounds with different actions. Externally regenerating salt designed for dishwasher, is characterized by larger and more uniform granules. She passes a few cleaning levels and has no harmful impurities. Manufacturers use their composition for the salt mixture, with various additional components:

  • sodium citrate that kills germs;
  • sodium percarbonate;
  • flavors;
  • disilicate and sodium bicarbonate;
  • polyasparginate sodium as the basis for the retention of ions and thickener.

 Salt composition

Operating principle

In the dishwasher there is a built-in tank with ionized resin. When water passes through it, the positively charged ions of magnesium and calcium are attracted to the negatively charged sodium ions in the resin. To restore the lack of sodium in the ion exchanger tank, at the end of the wash cycle, rinse it with sodium chloride water. After this action, the ion exchanger is ready again to replace the calcium with sodium upon the subsequent loading of the dishes.

That is why dishwasher makers use the term “regenerating salt"(Restoring). The chemical process helps to soften the water, thus the liquid enters the tank without harmful impurities. If you ignore the recommendations of manufacturers of dishwashers and do not use salt, over time, the ion exchanger will fail, and the details will be covered with scum. All this will lead to the breakdown of technology.

 Operating principle

Basic Answers to Frequently Asked Questions

Where and how to pour salt in the dishwasher?

With equipment comes tank for loading salt. To add sodium chloride, you need to unscrew the cap of the container for consumable components. Fall asleep right before turning on the device - this will save the technician from corrosion.

Before the first download, read the instructions for your model.

How to pour salt in the dishwasher?

The tool is selected, the machine is purchased, the next stage is to pour the optimal amount of substance. Before turning on the machine for the first time, pour about 1 liter of water into the salt container. After loading the tool until completely fill (about 1-1.3 kg). Close the hole, removing from excess substance. If use pills with sodium chloride, they contain as much of the mixture as needed per wash.

 Tablet

Why do I need salt for a dishwasher?

To cutlery quality washed from fat and leftover food, use only soft water without any extra impurities. It promotes saturated foaming, which removes dirt from cutlery. The water that flows in the water supply has rigidity parameters above the norm. Therefore, salt is used to soften water in typewriters. The tool converts potassium and magnesium ions to sodium ions, making the water softer.

It is also used to prevent scale from forming on the details of equipment, and cutlery was not in white divorces.

How to replace salt in the dishwasher?

If the water in your area is not too hard or you have a filter installed, you can use dishwashing tablets that already contain sodium chloride. The substitute has all the emollient characteristics of salt.

What is the best tool for the bosch dishwasher?

Many consumers of the German concern are faced with the search for an emollient component for dishwasher. For Bosch equipment, the same tool is suitable as for any machine. The manufacturer makes the following recommendations:

  • get water hardness information in the water utility;
  • according to the instructions set up work softener, based on the parameters of water hardness in the table;
  • total fluid flow for one wash cycle from 0 to 4 liters.

 Water hardness table

Basic recommendations when loading regenerating salt

  1. It is necessary to adjust the work of the softener, based on water hardness user Expensive models have the function of automatically determining this criterion, some manufacturers with the technique sell test strips to independently determine the level of rigidity.
  2. Load the tool when the indicator shows values ​​from 2 to 3, not 0.
  3. If the low salt indicator on the control panel gives a signal, you need to add a substance. If there is no sensor, add a consumable when the colored dot on the lid of the water softener tank is not visible.

Note! Never load detergent into sodium chloride bucket. In this case, the water softener can fail, and repair can not be avoided.

 Salt Finish

Overview of popular tools

  1. Domestic firm Finish has established itself on the positive side and is known to users of washing equipment. There will be enough salt for 25-30 washing cycles.The benefits include the affordable cost and effectiveness of consumables. Salt Finish has a number of advantages: prevents the formation of scale on the details, softens plumbing hard water. Thanks to good foaming, the devices are washed out without smudges and stains. The cost of one pack of 1.5 kg will be released to customers at 200-230 rubles.
  2. Magic power. This regenerating salt belongs to the budget options. It performs its functions with excellent efficiency. In addition, the company produces tablets containing rinse aid, detergents, and salt softening agents. Before using them for a dishwasher, it is necessary to read the instructions and recommendations of the manufacturer. For a pack, give about 140 rubles.
  3. The basis of the regenerating salt is purified and evaporated table salt, which is produced using environmentally friendly technologies. In its composition there are no phosphates, dyes, chlorine, flavors. For a pack of 2 kg, the buyer will give about 430 rubles - it will be enough for a year.
  4. Topperr - a means in the form of tablets containing sodium chloride, or large purified granules. Thanks to the components, the water is softened, thereby improving the quality of washing up.Price for 1.5 kg or 167 tablets of about 450 rubles.

The importance of using this component in the dishwashing process is undeniable. Using salt, you can not only extend the life of the device, but also make the process of washing cutlery and pots high-quality and impeccable.

Comments: 0
Continuing the theme:

Video camera

Home cinema

Music Center