Rules for embedding a dishwasher in the finished kitchen

Many housewives choose a dishwasher not only for saving time on daily homework, but also for the economical costs of water. If repairs are not planned in the near future, you can install the equipment directly into the headset. The built-in appliances have a number of advantages: the installation in the finished kitchen does not spoil the designer's idea, the device is hidden behind the furniture, and even a man who does not have sufficient experience can cope with the installation. To do this, you need to decide where to build the device, calculate the geometrical parameters of the niche, select the model of the device. With a long-awaited purchase, the question arises: how to build a dishwasher in the finished kitchen? This article will help you install the device so that the equipment worked for a long time and without failures.

The choice of location depending on the type

To integrate the device, you need to correctly determine the location of the equipment: the opening of the section must correspond to the dimensions of the box of the machine, the means of communication are located nearby. Experts offer several options:

Thus, it is easiest to fit compact models into the finished kitchen.

Main components for embedding

Below is a sample list of what you need to work:

1. A set of tools (nippers, cross-shaped screwdriver, drill, screws, building level).
2. To connect the water pressure hose, you will need a brass water tee.
3. Material for sealing (tow, rubber fum-tape, gaskets).
4. Ball valve.
5. Siphon in case the equipment is installed in a sink.
6. Clamps, crimp couplings

Important! To install a separate outlet, you need a two-core copper wire with good insulation. Socket choose moisture resistant.

Instructions for installing the unit in the finished headset

The most suitable option for embedding a dishwasher is to remodel the kitchen floor cupboard. To do this, you must perform certain steps.

Preparing a place:

• unscrew the screws holding the tabletop;
• unscrew the screeds, fixing the side and rear walls with the surface of the nearest cabinets;
• pull a piece of furniture;
• disassemble the cabinet, leaving only the side walls with doors;
• Using a drill and a crown, drill holes in the side wall for two hoses: a water supply and a sewer hose, as well as for electrical wiring.

Dishwasher installation diagram

Install side elements of the cap:

• take a metal tie;
• install each wall separately.

Install the embedded device:

• remove the connecting hoses, power supply wire;

• slide the device into the resulting niche;
• insert hoses and wiring in the holes;

• use adjustable feet in order to put the built-in car in a horizontal position;

• connect the discharge hose to the sewage system, and the cold water supply element with a brass tee to the nozzle;
• in case of additional mounting of the hose on the wall, use anchor clamps;
• connect the device to an outlet;
• Attach the faceplate of the base to its place.

If the dishwasher was not built in, do not worry - study the installation instructions of your model, as a last resort, there is always an opportunity to consult specialists.

Recommendations

That the built-in machine worked for a long time, did not flood the neighbors, listen in advance to some tips:

• check availability grounding - it will prevent electric shock;
• Make sure that the drain hose is not more than 2.5 m - the increased load has a negative effect on the operation of the pressure pump;
• it is not recommended to build the appliance under the hob;
• for countertop protection think about protection from steam; a metal plate is perfect for this purpose.

Now you have an idea how to install a dishwasher in the kitchen. To install appliances in a ready-made kitchen set, you need not only ideas where to embed the device, but also skills in working with plumbing and plumbing tools.