Instructions for removing the top cover in washing machines Indesit

Even reliable equipment, regularly working for several years, can fail. Repair in service centers sometimes is expensive, so users try to reduce their costs and do the most part of the work themselves. To determine the cause of equipment breakdowns, it is required in full or in part disassemble the washing machine "Indesit". Parsing this device often begins with removing top bar. To cope with the task, we consider in detail how to properly remove the top cover of the washing machine.

Key recommendations before starting work

• disconnect power from the communications system;
• move the device away from the wall - this will provide access to the unit;
• Prepare a Phillips screwdriver for loosening the screws, a flat screwdriver for prying various parts.

Before proceeding with the removal of the top cover of the Indesit washing machine, pay attention to the loading type: for the unit vertically loaded Actions and location of parts will be different.

The question may arise: is it easy disassemble washing device? If you do not know how to do this, you can use our instructions. It is suitable not only for technology Indesit, and for washing machine "Samsung" and some other brands. Exact compliance with step-by-step recommendations will lead you to the desired result.

Step-by-step instruction

The main goal of this process is to dismantle the upper part of the equipment for further car breakdown diagnostics, replacing a broken part or troubleshooting. How to remove the cover from the washing machine? Consider the basic sequential steps:

• unscrew two or three self tapping screw (depending on the model), which are located from the end just below the lid;
• move the top backwards at a distance of 2-5 cm, pushing it in a horizontal direction;

• slowly remove the lid up;
• do the sequence of actions in the reverse order;
• secure the design with screws, making sure that the dashboard tightly fell into place

As you can see, the manipulations are simple and with their help you can quickly remove the upper part of the washing machine.

Removing panels for top-loading equipment

Disassembling this device is even easier than a typewriter front loading. To remove the top cover, use a screwdriver: pry off the spare part on both sides and pull upwards. After that, tilt the plastic part towards you and remove.

Often, in addition to dismantling the top panel, you need to remove the rest. Consider how to remove front and side panels for this type of download. Basic actions:

• loosen the screws, keeping the removable washers to ground the case;
• bend the wall down, sliding it vertically to the floor;
• remove the side panel;
• having done the same actions, we remove the second edge;
• To remove the front panel, unscrew the screws to which access is free.

To assemble the machine, take the disassembled elements and repeat the steps in reverse order.

You can do it yourself with front-end or vertical loading equipment, the main thing is to use the recommendations and do the preparatory work slowly. You can also view videoif you have any doubts or questions, how and with what tools to remove the top plastic cover of the washing machine. Correct actions of equipment and washing without failures depend on coordinated actions. If after the video you cannot dismantle, use the services professional master.