How to clean the pump in the washing machine

Performing the function of the first assistant in household chores, the washing machine becomes indispensable household appliances. Its failure brings a lot of inconvenience. The appearance of malfunction signals in the form of a program failure during the washing process, in most cases, is related to the operation drain system. In the washing machine can be clogged pump, which should be cleaned as soon as possible. Otherwise, it is necessary to eliminate the already more serious problem to which it can lead.

 Washing machine pump

What is needed to disassemble the case

In the washing units, depending on the brand, a different design. If necessary, troubleshoot, there are different principles of disassembly.Even cleaning the drain system requires its own approach. Before disassembling, you should first familiarize yourself with the design features in the description. technical documentation. It will also help determine the set of necessary tools to get to the desired mechanism or detail:

  • wrench;
  • crosshead screwdriver;
  • flat screwdriver;
  • capacity to drain water.

This is a standard set that allows you to perform any manipulation, regardless of the design. To clean the drain pump, there are several principles disassembly of the machine.

 Instruments

Access to the pump through the bottom of the washing unit

The design, allowing to reach the pump through the lower part of the body, is provided in many models of such manufacturers as: Whirpool, Indesit, Samsung, LG, Ariston and others. This is the easiest way to clean the drain. In the cars of these brands, the bottom of the case is missing or easily unscrewed. To clean, you must perform the following steps:

  1. Using a screwdriver to open the bottom panel, in some machines this is a special door.
  2. Tilting the machine slightly, unscrew the cap of the drain filter clockwise, replacing the water tank.
  3. Drowning the pump inside, turning it counterclockwise, with a careful movement to remove from the case of washing equipment. The machine can be put on its side, since it is hard to do on weight.
  4. Remove the connections by disconnecting the wires.

Dismantling the front part

If you are the owner of a washing machine Siemens or Bosch, you can get to the pump through the facade of the case. The course of action will be as follows:

  1. First of all, remove the tray to load detergents and unscrew the screw.
  2. Remove the bottom of the panel to access the filter.
  3. Unscrew the next screw and remove the front panel directly.
  4. Under it there are 2 more screws, which should be unscrewed, in order to be able to remove the inner panel.
  5. Unclip the clamps, remove the clamp and detach the cuff.
  6. Disconnect hatch lock device and remove the front case.
  7. Drain, disconnect hose and other parts.

 Pump cleaning process

How to dismantle the pump through the back of the case

To clean the drain pump of the washing machine Electrolux, Zanussi, you must perform the following steps:

  1. At the back of the vehicle, unscrew the clips and disconnect drain hose.
  2. Using a screwdriver, unscrew the screws holding the panel and remove it.
  3. Disconnect the terminals with electrical cables and unscrew the pump with a key.
  4. Unscrew all elements from the drain hose and filter, remove the pump.

 Back of the washing machine

Pump cleaning feature

Cleaning the drain pump consists mainly of cleaning the impeller. To remove dirt, it is necessary to unscrew the screws on the pump casing - this will allow you to get to the head located between the two parts of the mechanism. Since the pump impeller rotates in working condition, it tends to wind hair, threads and other elements of things onto the surface. After you managed to remove all the pollution, you should to clean drain hose. The assembly of all elements back is carried out on the same principle as the disassembly, but the actions should be performed in reverse.

After carrying out all the manipulations and completing the assembly process, it is worthwhile to start the machine and make sure that the washing program is performed as usual, without failure and additional noise.

 Pump

Prevent clogging plums.

To increase the life of the required care for equipment. Of course, each unit has its own resource, but neglect can reduce the service life. A few tips on how to avoid frequent contamination of the drain system:

  1. Use powders designed for washing machines.
  2. Things with heavy dirt should be pre-rinsed in a separate container.
  3. Clothing decorated with small elements should not fall into drum cars or wash in a special bag.
  4. Be sure to put filter for cars in the place of water intake.
  5. If there are extraneous sounds or increased noise of the machine when draining, the drain system should be disassembled (upon completion of the washing process) and remove debris from the hose and pump.

All manipulations associated with washing and caring for the machine are easy to do, subject to the basic rules of operation of equipment.

Comments: 0
Continuing the theme:
Ratings

Rating washing machines for quality and reliability. Ten best stand-alone models, their features and important technical parameters. Advantages and disadvantages, the price level.

Video camera

Home cinema

Music Center