What to do if the washing machine does not gain the necessary speed in the mode of spinning linen

Unfortunately, even reliable products from well-known manufacturers sometimes give serious malfunctions. Among them is often the case when the washing machine does not gain momentum during the spin cycle. Before asking for help from specialists, it is necessary to find out the cause of the problem and try to fix it on your own.

 Drum is not spinning

Malfunctions without repair

If the electric motor does not go to the desired mode, then it will not work out. But do not panic - try to find out the cause of the unstable work of the “washing machine motor”.

First check if the “speed adjustment".In most machines, such a function is present. If you choose a program delicate wash - then the spin mode will be the same.

In some cases, it is not possible to gain the required number of revolutions to the engine from the washing machine for such reasons:

  1. Washer overloaded.
  2. Too little laundry in the drum. In some products, there is a sensor for the minimum weight of linen, which does not start spinning with a low amount of clothing in the tank. Add a large terry towel, and the process will follow a streamlined pattern.
  3. Sometimes arises imbalance. For example, when a lot of small things crammed into a blanket. In this case, distribute all the laundry evenly and repeat the spin.
  4. Low voltage online. For the "spin" mode, the engine of the machine must grow faster than during washing, therefore more energy is required.
  5. Incorrectly installed wash program. Check whether the mode can be selected without spinning or delicate mode.

 Lingerie in washing machine

Many home craftsmen are interested in the question: how to regulate the revolutions of the engine from the washing machine, if this function is absent in the control, and how much the rotation speed can be reduced.

Attention! To reduce, even slightly, the existing parameters of engine speed from the washing machine is strictly prohibited.

Such parameters can be reduced by specialists from the service center who have a special equipment for repairing washing machines. If the speed is reduced independently, then this can lead to serious problems during further operation.

Repair required

Consider the problems from simple to more complex case.

The drum does not pick up speed or makes one revolution and stops

Possible reasons:

  • Stretch adjustment belt. Because of this, he can slip, and the drum can stop completely.
  • Loose drum pulley mount.

In the first case, open the back cover, check the belt tension. If necessary, tighten or install a new belt. In the second - we tighten the bolts.

Extreme wear of brushes of the electric motor

It is easy to determine it: there is a smell of burning and extraneous noise coming from the car. At the first manifestation of these symptoms it is necessary to stop the washing process. To replace the dismantled engine.

Tachogenerator does not work correctly or is faulty.

This device is located on the motor shaft. You can check its serviceability without dismantling the engine.Disconnect the wires from the connector, check the resistance, which should be about 60 ohms. If everything is normal, then check the mounting of the coil on the shaft, to loosen when loosening.

Tip! We must remember that the tachogenerator is a very reliable device and fails extremely rarely. The main reason is overloading the washing machine.

The control unit issues incorrect commands.

In this case, you must contact the service center to replace or reflash the unit.

If all recommendations are fulfilled, and the fault is not resolved - contact the service center diagnostics and repair. Only a professional is able to understand all the nuances of modern technology for the home.

Comments: 0
Continuing the theme:
Ratings

Rating washing machines for quality and reliability. Ten best stand-alone models, their features and important technical parameters. Advantages and disadvantages, the price level.

Video camera

Home cinema

Music Center