To what temperature can the iron heat up

To iron clothes, the iron needs to be heated, at the same time its sole will also heat up. The temperature of the iron can be different, its choice takes into account the type of fabric and the volume of things for ironing. Each model of this device differs in its characteristics and functionality. An important parameter of any electric iron is its power.

What do the numbers or points on the electric iron panel mean?

The power of the iron affects the heating temperature of its sole, as well as the rate of heating. In modern home models, power is usually within 1400-1900 W (1.4-1.9 kW). The most common power is 1400-1500 W (1.4-1.5 kW), which is quite suitable for ironing jeans or shirts.

On the iron panel dots or numbers usually mark the temperature range.

 Thermostat knob

One point or 1 in the panel indicates:

  • The maximum temperature is 115C.
  • The minimum temperature is 75C.
  • The nominal is 95С.

A two point or 2 indicates the temperature:

  • The maximum is 155С.
  • The minimum is 150C.
  • Nominal - 130С.

Three dots or 3 on the panel indicates the temperature:

  • Maximum - 205С.
  • The minimum is 145C.
  • Nominal - 175С.

What material are the soles made of?

In order for the ironing result to be perfect, the sole of any electric iron must be warmed up. evenly. Devices with a ceramic surface have this ability. There are also irons with metal (aluminum, steel, cast iron) sole. They are characterized by good glide, good heat capacity, durability.

 Iron sole

Most modern irons have built-in thermostats, tubular electric heaters (heating elements) and signal lamps. More expensive models are equipped steam humidifiers. However, all this functionality has no practical effect on the heating temperature of the electric iron sole. So in order to determine what temperature to expose for ironing things, it is better to focus on the above ranges.

About optimal temperature conditions

For each type of fabric has its own ironing modes, allowing to bring clothes into a decent look, without harming her. All models of irons are now equipped with a function. temperature adjustment by type of fabric. And for this you need to know at what temperature should be ironed this or that thing.

Council Almost every thing has special labels with a note about the temperature at which you can iron this product.

If there are no tags, but the material from which this thing is made is known, you can use general recommendations. Knowing the maximum and minimum temperature of heating of the soleplate (205 and 78, respectively), having an idea about the material of the product, you can easily choose the optimal mode for ironing.

How to choose the right iron for home

It is important when choosing this home assistant to pay attention to its design and various functional additions:

  1. The working plane of the iron in contact with the fabric when ironing is called the sole. Its characteristics largely determine the functionality of this electrical device. Therefore, it is important to pay attention to this when purchasing. The sole can be made of aluminum, steel or metal ceramics.The cost of the appliance also depends on the material of the sole.
  2. The function of moistening with steam, which can help quickly and well iron any fabric. Here it is important to estimate the volume of the water tank, which can vary from 200 to 400 ml.
  3. Water sprinklers are needed to moisten things before ironing in cases where the steam is absolutely impossible to process them. And you need to use only purified water, so as not to leave dirty stains on clothes.
  4. The function “for the forgetful” using a special sensor will help protect both the clothes and the iron itself (after 20-30 seconds idle in a horizontal position or several minutes of inactivity in a vertical position, the iron automatically turns off).

It is also necessary to pay attention to the consumption of electricity by the device, that is, the power consumption of the iron, which can significantly affect the rate of heating of the sole and the process of formation of steam:

  1. Models of irons with a capacity of less than 1500 W (1.5 kilowatts) are usually small in size and belong to convenient road models. They do not have the function of vaporization.
  2. Electric irons, having a power of 1500-2000 W (1.5-2 kW), are suitable for a small number of things that require ironing.
  3. Choose irons with a capacity of over 2000 W (2 kW) should be if you constantly iron a lot of things at once. With the built-in steam function, the speed and quality of ironing will be significantly higher. Such models are more related to professional ironing devices than to home ones.

 Iron with steam generator

Before you buy the most powerful iron, find out in advance how much voltage is in your electrical network and whether it corresponds to a given power.

If you need to buy an electric iron for daily use with small amounts of clothing, you should choose models with a capacity of 1.4 - 1.5 kW. Do not forget about the compliance of the power and capacity of your home network. It is very important to take into account how much electricity the iron consumes, and what additional functionality it has.

Comments: 2
Continuing the theme:
Ratings

What irons are considered the best, according to customer reviews? Ranking of the top 10 models for 2017. Specifications, advantages and disadvantages, the opinion of users.

Comments: 2
Anonymous / 05/30/2018 at 05:10

I advise you to change or delete the phrase "Before you buy the most powerful iron, find out in advance how much voltage is in your electrical network." Without even going into the wilds - voltage, current, power, wire size, etc. - just give an example. I took the device and measured the voltage in the network - I received, for example - 210 volts. Can I buy a “powerful iron” or not ???

    Reply
    M / 02.22.2018 at 02:05

    Thank!

      Reply

      Video camera

      Home cinema

      Music Center