Homemade water activator

And although water activators are not too expensive, sometimes there are situations that a person simply cannot acquire a device he needs at a given time. This is completely fixable: a simple water activator can be made by hand.

What you need to know before starting work

The first requirement for each person who has undertaken such work is to understand the topic. That's right: you have to be guided by electrical circuits.

The second rule is to create such a device only in the most hopeless situations. Here it is necessary to clarify in more detail: never an electroactivator of water collected in “field” conditions will give the quality result that the manufacturer guarantees from the enterprise.

This option is really only needed for emergency cases (for example, when clean water is out of the country). The difference is as follows.

  1. The purchase device is aimed at deep cleaning, including from various impurities. It is able to work with large volumes, while maintaining the required quality. In addition, the warranty period declares the long-term operation of the device.
  2. "Home" machine gives very low quality cleaning. Use it best in the case of a one-time need. Homemade does not help to cope with the rigidity and ironiness.

According to experts, the constant use of water purified by a homemade method, will cause damage to health. Often at home it is not possible to pick up the actual material of stainless steel for the manufacture of one of the anodes. This will lead to the fact that when a current passes through such an electrode, water (and then the body) will flow harmful metal ions nickel, vanadium, chromium, molybdenum. Their prolonged stay and accumulation in the body lead to serious illnesses.

 Properties of living water

After using industrial activator devices, this does not happen - here a titanium coating or a special food grade of stainless steel is used for cathodic manufacturing.And for the anode they take platinum or other special coatings. At home, of course, there are no such resources.

If after such warnings remained determination and relevance in the manufacture of a homemade activator, then you should get acquainted with further material.

Ways to create water activators

The most natural and effective magnetic activator of water is a piece of silicon placed in it. After that, the container should be left to infuse for several days. However, this is not always convenient if there is an urgent need for cleaning, but there is another, more complex production option.

You will need the following components:

  • diode bridge;
  • 1 liter water can;
  • electrodes made from food grade stainless steel;
  • canvas bag, which will become the separation membrane.

A material for making a canvas bag can be the material of a fire hose. If possible, it can be replaced with unglazed ceramic glass.

The simplest scheme is as follows:

 Water activator circuit

Again, it is necessary to comply with such requirements:

  • the distance between the electrodes should not exceed 40 mm, nor should they reach the bottom of the can;
  • dimensions of stainless steel sheet - 40x160x0.8 mm.

Electrodes are fixed on a plastic piece (plays the role of a cover). Here it is also necessary to install a diode bridge with a switch. electrical safety remains relevant - that is why at the top of the design should be closed with a lid of suitable size.

 Electrode mount

Operating rules

It is allowed to use water from the tap, but with the chlorinated variant it is worthwhile to let it stand for a couple of hours. Another variant - boiled water. The positive view of the electrode is lowered into the canvas filler (or ceramic glass), and the other electrode goes into the jar. Now you can connect to the mains: inside the tarpaulin will be acidic water with a pH of 6 or lower, and in glass containers it will become alkaline with a pH of 10 (7).

Usually, after turning on the device in the network, it is enough from 3 to 8 minutes to prepare the necessary concentration of water. However, it usually heats up to 70 degrees. After that, the plug is disconnected from the power supply, the tarp is quickly pulled out, and the “dead” water (+) is poured into another container. Otherwise, the solutions will quickly mix and their useful properties will disappear.

Sometimes white flakes can float in live fluid.Do not be afraid, it's just salt hardness, released in the activation. You can remove them with a filter or just settle and drain the precipitate.

Keep both solutions should be in a dark container, tightly closed the lid:

  • in "living" water properties will remain within a month;
  • the "dead" - no more than two hours.

 Operation of a modern activator

It is better to use both of the resulting solution immediately, and not to store them for a long time.

If a food stainless steel was used for the electrodes, then the process can be repeated for 2-3 cycles. However, some measures are necessary to maintain the health of the device.

  1. The cathode and anode should be interchanged from time to time so that electrode self-cleaning.
  2. Tarpaulin bag is treated with vinegar, immersing it there for half an hour. Suitable small dishes in which it can fit. After this procedure, the material is washed under running water.
  3. Store the bag and jar should be separately.

In addition to these rules, you must comply with the following security measures.

  1. Turn on the device only when it is filled with water, and the electrodes are located inside the jar.
  2. Do not touch the housing of the working device.
  3. Do not allow children to it and do not leave the device unattended.

At the first opportunity it is better to purchase a model of industrial production. This should be done for the safety of their own health and their loved ones.

Comments: 1
Continuing the theme:
Comments: 1
Love / 12/13/2017 at 12:01

Such a device was made to me by a brother. Tell me, how often to immerse the bag in table vinegar?

    Reply

    Video camera

    Home cinema

    Music Center