How to use ball quartz sterilizer

The tabletop ball sterilizer, also called quartz, can be used for high-temperature processing of instruments in the field of:

  • cosmetology;
  • dentistry;
  • manicure-pedicure;
  • beauty salons.

The sterilizer is called ball, due to the fact that the tools in it hold the glass balls in an upright position.

Special features

Quartz sterilizer works at temperature 250 degrees. Just enough half a minute to happen processing the working surface. This device can be used directly during the work of a beautician or hairdresser, right at the workplace. It is necessary to use it exclusively on those devices that are in contact with the skin or injected under it.

The principle of operation of the sterilizer is simple: it is based on high temperatures (balls of quartz are heated), which affect the working surface.

The body of the unit is made of plastic, and inside there is a special container made of metal, where the quartz balls themselves are located. During operation, the container must be closed with a lid.

 Quartz Ball Sterilizer

First application

Before you start using the device, you must read the instructions for its use. First you need to fill the sterilizer with balls, close the lid and turn on the device in the electrical network.

While the quartz will be heated, the lid can not be opened. This may cause accidental burns.

In order to turn on the device, you need to press the main power button. In many models there is an indicator that signals that the device is turned on, and the heating process is started.

The device should heat up until the indicator goes out - until the temperature reaches 250 degrees. On average, it takes up to 15 minutes. Now you can carefully lift the lid and put all the necessary items for processing. For complete sterilization, 30 seconds is enough.At the end of the procedure, the instrument is carefully removed, the lid is closed back, and the device is turned off.

Precautionary measures

To properly use this ball sterilization apparatus, you must follow some rules:

  1. You can not turn on the unit in the network if it does not contain balls of quartz.
  2. Before you move the device to another place, you need to make sure that it is disconnected from the mains.
  3. You should not perform any movements of the apparatus, if it already has balls.
  4. You need to be careful not to touch the inner container and balls.
  5. Do not cover the device.
  6. It is forbidden to insert inside wooden or plastic elements. Quartz should only work surface.
  7. Do not leave tools in the tank for longer than 1 minute.
  8. After use, be sure to remove the plug from the power outlet.

How to store the device

A very important and crucial moment is proper storage of the device. Best if kept in a special box. The room should have a constant average temperature level and a low humidity level.

Before leaving the device for storage, you must check:

  • whether it is disabled;
  • whether the plug is disconnected from the mains;
  • whether the device has cooled down.

Care device

In order for the ball sterilizer to serve you as long as possible, it must be serviced and repaired. only specialistswho know how to do it.

Care is as follows:

  1. Every day, after use, it is necessary to clean the surfaces.
  2. If the cable going to the electrical network is damaged, it must be repaired immediately, but this should be done only in a specialized technical support center.

Security measures

  1. Before you start cleaning the device, you must remove the plug from the electrical network and wait until it cools completely.
  2. After cleaning, you can not immediately turn on the unit.
  3. Even when the sterilizer is not used, it must be systematically cleaned.
  4. You can only clean the surface of the container, the cover and the outer case.
  5. If liquid has penetrated inside, you should not try to solve the problem yourself, you need to contact technical support.
  6. Do not use chemical scouring powders during maintenance.You can use only soft cleaners and a soft cloth.
  7. After the procedure, it is necessary to wipe the device with a clean and dry cloth.
  8. Do not forget to look into the manual in case of difficult situations.

Comments: 0
Continuing the theme:

Video camera

Home cinema

Music Center