Convector with ionizer: doubly winning

To maintain a favorable and optimal conditions in the living space, an indicator of the microclimate is important. Any stove or portable heating system significantly dries the air, and in cold weather it is not possible to open windows to saturate the room with oxygen. The solution to this problem was convector with built ionizer. Consider how this device works.

 Convector with an ionizer in the interior

Purpose and application

Not so long ago, manufacturers began to produce combined instrumentscombining a convection method of heat transfer and the possibility of an ionizer. Today, there is a huge variety on the market. electric convectors from the budget to premium models from reputable manufacturers. With these devices, you can easily create the perfect indoor climate.

Attention! The acquisition of these two devices - a convector and an ionizer - separately, will cost you much more than the purchase of a combined device.

Principle of operation

We will understand how the heat transfer in the convector is arranged. Here engineers used the principle natural mass transfer. Cold air, located below, has a negative temperature. When heated, it expands and becomes lighter, as a result of which it rushes upward on the principle of thermogravitational convection (for more details, see the articlehow does electric convector work).

 Covector operation principle

Scheme heating air convector

The device is controlled by a thermostat, it can be mechanical or digital. with electronic temperature indicator. The convector is equipped with additional functions, such as: timer, non-freezing mode, air ionization system.

Ionization function

Why do I need to ionize the air? Over time, the cells in the body of people lose the negative potential of charge. This leads to a weakening of the blood cells, with the result that they begin to stick together.Soviet scientists Chizhevsky L.A. A theory of air ionization was proposed by applying high voltage to metal needles with a diameter of 5-10 micrometers. As a result of such exposure, oxygen molecules are captured and acquire a negative charge. When inhaling air ions, blood is saturated and blood circulation improves.

 Ballu - ionization convector

Design advantages

In addition to the benefits derived from the purchase of the combined model, it should be noted other advantages inherent in them:

  1. Lack of mechanical parts. Work is carried out silently.
  2. Easy to install and maintain.
  3. The case does not heat up much. Heating reaches a maximum of 60 degrees.
  4. Efficiency - efficiency is 90 percent.

Right choice

When purchasing a convector should be guided by the following recommendations:

  1. Volume of heated area. Basically, convectors are used in apartment buildings, offices or technical premises, where the ceilings do not exceed three to four meters. If the device will be used as additional equipment, then it is necessary to proceed from the calculation of 25 W per cubic meter. With the complete absence of heating - power should be already 40 watts.On the market are models with a capacity of 0.5 - 3 kW.
  2. Convector dimensions and installation method. The greater the height of the device, the slower the room will warm up. Usually heaters are used only in the cold season. In terms of convenience, win mobile (floor standing) models on wheels.
  3. Cost of. Models of famous manufacturers have a higher price. However, it is better not to save in this case. By paying a slightly higher price, you will have the opportunity to contact the service center for warranty and post-warranty service. In addition, high-quality materials used in the production, a positive effect on the reliability of the device and your safety.

 Convector with onionization, Dantex

Operating rules

Follow the simple rules and the device will serve you long and efficiently. Some tips on using a convector with an ionizer:

  1. In accordance with safety regulations, the convector should be positioned at least 15 cm from the floor and from the nearest objects. The distance to the wall must be at least 25 cm.
  2. In no case do not close the upper louver, it can lead to overheating of the device.
  3. For maintenance work, turn off the device from the outlet.Make sure the device is cool. Then wipe the case with a damp cloth and with a vacuum cleaner and a brush, go downstairs where the heating element is located.

Conclusion

Enjoy all the benefits and capabilities of a convector with an ionizer. This effective and convenient device will allow you to easily create an optimal indoor climate. Our recommendations on the choice of the device will help you to make the right choice in accordance with your goals, and adherence to elementary operating rules will ensure your safety and extend the service life of the convector.

Comments: 0
Continuing the theme:
Ratings

Rating of the best heaters for heating small areas.Oil radiators, their main advantages and disadvantages, brands of manufacturers of climate technology for the home.

Video camera

Home cinema

Music Center