6 reasons to buy a water heater with a dry heater

About 12 years ago, a new model of dry-water heaters appeared on the domestic market. They quickly gained popularity among apartment owners, their own houses and country cottages, as they ensured better performance in a more compact format.

Advantages of dry boilers

We consider the 6 main differences that distinguish boilers with dry fuel heaters against the background of ordinary ones.

Total lack of scale

The amount of scale generated is influenced by 2 factors:

• tap water hardness;
• the area of ​​contact of the heating element with water.

Tap water hardness directly determines the amount of scale that will form inside the unit. The greater the amount of scale present in the boiler, the slower the process of heating water. In the "dry" water heater there is no direct contact of the heating surface with water, which eliminates the possibility of scaling.

It is important to know: scale is the main reason why water heaters fail. Eliminating scale as a breakdown factor, you significantly reduce the risk of problems with the boiler.

High performance

The second reason comes directly from the first. In classic water heaters, a rich layer of scale slows down the rate of water heating, which significantly increases the water-heating cycle. In addition to rapid heating, the boiler with a dry heater has more long service lifethat will undoubtedly affect the choice of consumers.

The amount of energy expended in a boiler with a dry heater is much less than that of its classical counterpart. Than less energy consumed - the less will be the fee for it.

Ease of use

Boilers with dry PETN due to their design have more easy maintenance system and replacement of defective parts. To replace the heating element there is no need to completely drain the water from the tank. It is enough just to get it through a special hole in the body of the heater and replace or repair it, and then put it back.

Dry TEN with a flask

Relatively small size

The heating element in boilers with dry PETN is smaller in comparison with its “wet” counterpart. If you need a lot of hot water, you can put it in your water heater. extra dry PETN, which will increase the performance of the unit.

The average family of 3 people for everyday life will be enough water heater Atlantik with a dry heater of 80 liters. It makes no sense to overpay for the extra amount, because it is not only additional energy consumption, but also a large footprint. This factor is important for all owners of small-sized housing.

The presence of thermal protection blocks

Water heaters with dry PETN cannot operate without water in the tank. This is achieved by having special thermal protection blocksthat work in the event of a similar situation.They prevent the so-called "dry start", thereby saving the heating element from burnout.

In case the thermal protection blocks for some reason do not work, only the heating element itself will break down, without affecting other systems of the water heater.

Long service life

According to statistics, owners of classic water heaters produce work item replacement once in 1-2 years, while the owners of dry fuel heaters - once in 4-5 years. Given the current prices for all the working elements of such devices, this advantage will help save a lot of money.

The principle of operation of "dry" and "wet" heating element

Disadvantages of dry PETR

The disadvantages of this type of water heaters include:

• higher price;
• difficulty finding work items.

Since such models are equipped with special heating elements, replacing them in the event of a breakdown will require a similar original part, while the classic boiler does not need such an individual approach. Despite these minor flaws, this type of boiler has a number of positive qualities,which make him a leader in the modern markets of water heaters.

An overview of models of dry boilers

Consider two popular models of the average price segment. With the purchase of these units you will not have problems with the search for replaceable heating elements, as they are running.

Atlantic STEATITE VM 80

A large model range and high quality allowed the company Atlantic to become a confident leader in the production of equipment in Russia and Ukraine.

Water heater Atlantic STEATITE VM 80

The model Atlantic STEATITE VM 80 is a storage tank with a dry heater and a volume of 80 liters. Power consumption - 1500 watts. The body of the water heater is made of of stainless steel and is covered with an enamel shell that provides the device with a long service life. Another important advantage is the presence of magnesium anodewhich protects the technique from the destructive effect.

To date, the average price for this model is 10,000-11,000 rubles, which is the average for the market.

Gorenje GBFU 80 B6

The boiler Gorenje GBFU 80 B6 is a storage water heater of 80 liters. The model has a unique advantage - universal installation. This means that you can install your boiler in both vertical and horizontal position.Magnesium anode and steel enameled tank protect the device from the damaging effects of rust.

Water heater Gorenje GBFU 80 B6

The model has two dry 1000 watt fuel heaters. The total power of the device - 2000 watts. The maximum possible temperature of heating is 75 degrees. At the same time, during which the water is heated to a maximum temperature of 3 hours 5 minutes.

The average price on the market is 12000-13000 rubles.