Top 10 air piston compressors

In the sphere of production, maintenance and repair, pneumatic tools are often used. Its operation requires a source of compressed air that is able to provide the necessary gas flow rate with a certain increased pressure. A piston compressor is usually used for this purpose. Such units produce dozens of not only reputable, but also not very well-known companies, whose products are abundantly represented in the pavilions of specialized stores. The 2018 piston compressor rating proposed here is designed to help an inexperienced buyer to acquire a truly high-quality device for production or domestic needs.

10. PATRIOT EURO 50/260

One of the most convenient compressors for home and garage at an affordable cost of 9000 rubles has acceptable technical characteristics.It has an electric motor with a power of 1.8 kW, operating from a standard 220 V household network. The design provides one cylinder with an oil lubrication system capable of providing an air flow of 260 l / min under a pressure of 8 bar.

A receiver with a volume of 50 liters provides the necessary reserve and effectively smooths out pressure fluctuations. Provided for connecting pneumatic tools 3/8 inch fitting with quick coupling. All moving parts are hidden inside the plastic case. The device has compact dimensions, and the weight is only 27 kg, which in the presence of two wheels and a convenient handle allows you to move it without problems within the working area.

 PATRIOT EURO 50/260

  • reliable design;
  • long service life;
  • high mobility;
  • operational safety;
  • minimal maintenance;
  • profitable price.
  • performance and volume of the receiver is designed to provide air to one consumer;
  • Plastic parts require careful handling.

PATRIOT EURO 50/260

9. ZUBR ZKPM-440-50-R-2.2

Simple and reliable air compressor for professional work delivers up to 440 l / min of compressed air with a pressure of 10 atm.It is equipped with an electric motor with a power of 2.2 kW, connected to the mains of 220 V, two cast-iron cylinders and a belt drive that easily smoothes peak loads. It has a 50-liter receiver with a pair of wheels, two strong supports and a handle for moving.

 ZUBR ZKPM-440-50-R-2.2

The special features of the model include the reliable protection of the engine against overloads, a replaceable air filter, a pressure relief valve, and a pneumatic automatic shutdown of electricity.. The design provides for a quick replacement of the outlet fittings for different consumers. It is possible to regulate the flow in any direction. Kit weighs 47 kg. The price of the entire unit does not exceed 20 000 rubles.

  • good performance with sufficiently high working pressure;
  • solid set of protective functions:
  • convenient control unit with pressure control by two manometers;
  • the ability to connect multiple consumers;
  • mobility;
  • 5 years warranty.
  • belt drive is not closed;
  • small receiver volume.

ZUBR ZKPM-440-50-R-2.2

8. Elitech KPM 200/24

Great compressor for mobile use and solving one-time tasks is suitable for painting, servicing vehicles and providing various pneumatic tools with compressed air.With small dimensions of 605x625x280 mm and a mass of 25 kg, it creates an overpressure of 8 atmospheres with a flow rate of up to 200 l / min. Two wheels and the convenient handle provide mobility and maneuverability of the device.

The compressor unit consists of two cylinders operating in a single-stage compression scheme. Aluminum housing with the necessary strength provides effective heat dissipation. Direct drive for safety of operation it is closed by a plastic box.

Important! Quick access to the air filter provides ease of cleaning and replacement.

The volume of the receiver 24 liters. Connecting the tool is rapid. The supply voltage is 220 volts. Power consumption 1,5 kW. This small model costs only 6000 rubles.

  • compact size and low weight;
  • comfortable design;
  • simple maintenance;
  • good cooling;
  • resistant legs with rubber pads.
  • flow and pressure are suitable for a limited set of tasks.

Elitech KPM 200/24

7. Abac Montecarlo L30P 1129100037

This model of the Italian brand is not accidentally entered the top of the compressor for the garage, car repair shops and construction. It is equipped with reliable single phase electric motor power of 2.2 kW, running on 220 volts.The compact air compression unit consists of a single cylinder, which gives 310 l / min of compressed gas with a pressure of 10 atmospheres. The developer has provided the typical for such performance. 50 liters horizontal receiverto which two wheels and a support fasten from below.

The cylinder block is made of cast iron and aluminum, and has a relief surface that improves heat transfer. This unit weighs 36.5 kg, which allows it to be moved by one person. This model is worth 24-25 thousand rubles.

 Abac Montecarlo L30P 1129100037

  • high performance;
  • compact design with a reliable protective cover;
  • effective lubrication system;
  • convenient pressure control;
  • European quality of the used materials.
  • a single support leg does not always provide adequate stability.

Abac Montecarlo L30P 1129100037

6. Metabo Basic 250-24 W OF 601532000

This direct-drive piston coaxial machine belongs to the family of oil-free compressors used in situations with high demands on clean air, with the exception of medicine, food and cosmetic industries.. It operates from a single-phase electrical network, consuming 1.5 kW of energy.

With a receiver volume of 24 liters, the dimensions of the compressor are only 620x340x580 mm.It weighs 24 kg. Such a model will always find a place in the garage or a small workshop where you can always use it for cars, any repair or technical needs. It gives up to 220 l / min of compressed air to 8 atmospheres. You can buy this reliable and compact unit for only 9,500 rubles.

 Metabo Basic 250-24 W OF 601532000

  • convenient adjustment and control of working pressure;
  • durable casing;
  • motor overheating protection;
  • easy start;
  • small weight and size;
  • no oil inclusions in the supplied air.
  • small productivity;
  • short cable

Metabo Basic 250-24 W OF 601532000

5. Remeza SAT 4 / C-100 LB 30 A

One of the most convenient in operation oil compressors Belarusian production is widely used in tire, in the construction and repair of various equipment. It is connected to a normal electrical network of 220 volts. With a net weight of 88 kg, it achieves a capacity of 420 l / min. A working pressure of 10 atmospheres is created by two cylinders. For smoothing the amplitude of oscillations and a set of some air supply, a horizontal receiver with a volume of 100 liters is provided. Power consumption 2,2 kW.

Connection of the tool is made by rapid connection. This unit has a good air cooling system, reliable protection of the belt drive, a compact control and monitoring unit, a stable support and a pair of wheels to facilitate movement. It costs about 30 000 rubles.

  • high reliability;
  • mobility;
  • compact layout;
  • Manufacturer's warranty 1 year.
  • insufficient performance to connect multiple consumers.

Remeza SB 4 / C-100 LB 30 A

4. FIAC AB 500/858

The best air compressor for a large repair shop from a reliable Italian manufacturer, designed for pneumatic tools with a working pressure of 16 bar. For this here implemented two-stage air compression system. The motor is connected to a three-phase electrical network and consumes up to 7.5 kW of electricity. The capacity of the unit 850 l / min with a margin is enough for the operation of several consumer devices. On the discharge side, bayonet connectors with a diameter of ¾ and ¼ inch are provided.

This powerful belt-driven compressor weighs 250 kg and is designed to fixed installation inside the enclosed space.

 FIAC AB 500/858

Important! A horizontal receiver with a capacity of 500 liters on four pillars allows you to significantly reduce the number of starts and stops of the motor incase of incomplete workload, which has a beneficial effect on the extension of its resource. However, automatic overload protection ensures trouble-free operation of the equipment and in continuous mode.

The market price of such a device ranges from 90-100 thousand rubles.

  • high maximum performance;
  • steady work on any modes;
  • high pressure;
  • reliable lubrication method;
  • convenient control system;
  • effective engine protection.
  • lack of mobility;
  • high price.

FIAC AB 500/858

3. Metabo MEGA 350-50 W 601589000

Reliable "workhorse" from the world of reciprocating compressors, developed by German engineers, will perfectly cope with any professional work with the use of pneumatic tools. She was pleased to get repair organizations in 2017, and now she remains at the peak of popularity.

The model is equipped with a 2.2 kW single-phase electric motor connected through a belt drive with two compression cylinders. Used by oil lubrication method. Output characteristics: pressure 10 atmospheres, capacity 315 l / min. Receiver volume of 50 liters is made of quality steel and is not afraid of corrosion. The total weight of the product is 52 kg.For ease of movement, it is equipped with two large rubber wheels and a pair of swivel castors. The cost of the compressor is 37 thousand rubles.

 Metabo MEGA 350-50 W 601589000

  • universal characteristics;
  • easy start;
  • long service life;
  • high-quality assembly;
  • compact design and reliable protective cover;
  • easy configuration and maintenance.
  • the difficulty of fixing on an inclined surface.

Metabo MEGA 350-50 W 601589000

2. Remeza SAT 4 / C-100 LB 75

A professional compressed air supply unit for a stationary installation in production workshops and large repair shops operates from a three-phase 380 volt electrical network. It weighs 143 kg and rests on four legs, welded to a horizontal receiver with a volume of 100 liters.

The unit is equipped with a powerful engine of 5.5 kW, three working cylinders with oil-type lubrication, belt drive, efficient air-cooling system. Productivity reaches 950 l / min. The maximum pressure at the outlet of 10 atmospheres is controlled by two manometers and is regulated with the help of stop valves. The pneumatic tool is connected by bayonet connection. Such a model is worth about 60,000 rubles.

 Remeza SAT 4 / C-100 LB 75

  • high performance;
  • large supply of air;
  • reliable design;
  • simple operation;
  • good cooling.
  • lack of mobility;
  • Not everywhere there is the possibility of connecting to a three-phase network.

Remeza SAT 4 / C-100 LB 75

1. FIAC AB 100-360 A

One of the best build quality piston compressors is characterized by universal productivity of 360 l / min and pressure of 10 bars. It operates on a standard electrical network of 220 volts, consuming 2.2 kW of electricity. The unit is characterized by ease of operation, minimal maintenance and long service life. He has two cylinders, belt drive and efficient airflow.

100 liters receiver provides the necessary supply of air and smooths out pressure fluctuations. The weight of the device reaches 80 kg, therefore a wheel pair, a swivel roller and a handle are provided for its movement. The cost of the model is 31,000 rubles.

 FIAC AB 100-360 A

  • optimal ratio of price, power consumption and output characteristics;
  • safe construction;
  • good cooling;
  • motor overload protection;
  • steady work on any modes;
  • long service life.
  • are missing.


FIAC AB 100-360 A

Conclusion

The design and technical capabilities of the compressor equipment from most respected manufacturers are in many ways similar.Differences most often relate to layout decisions and materials used. If you know exactly for what needs you need an air compressor, and what parameters it must comply with, you just have to choose a company you can trust and choose the right model from the range offered to it.

Comments: 0
Continuing the theme:

Video camera

Home cinema

Music Center