The best submersible pumps in 2018

Each owner of a country house, cottages with their own wells and wells necessarily face a difficult choice if you want to buy a reliable and productive pump. The market offers a huge number of models from different brands. In order not to make mistakes, you need to take into account many factors. For example, the level of mechanical particles (sand), the depth of the well, the height of the rise. It is necessary to obtain the necessary amount of water for comfortable consumption. To facilitate the choice of the buyer, the 2018 water pump rating was compiled, which included models ideally capable of solving problems of different levels.

Top borehole models

Well location models distinguish special hull shape: it is cylindrical and allows you to place the pump in the protection pipe tightly enough.

You can purchase a dirty water device equipped with a cleanable filter (manually or automatically) that has built-in protection systems.

To meet the average needs of the owner, the well pump must:

• pump from 1 to 5 cubic meters of water per hour;
• have a built-in protection system against sand;
• be characterized by an acceptable level of immersion corresponding to the depth of the well;
• have enough pressure to provide a house of a certain height.

In compiling the rating, reliable models were selected that received positive consumer reviews, including in the context of the availability of the manufacturer’s service network or available spare parts for repairs.

5. BELAMOS TF3-60

This Russian-made device is distinguished not only acceptable pricebut also excellent technical performance. The pump can operate in the well up to 80 meters, supplying enough water to meet the needs of a small house and watering the backyard.The 800 W device has a capacity (flow) of 2.7 cu. m per hour

The feature of this pump lies in the absence of pressure parameter. The device under normal load conditions is capable of delivering water up to 60 meters, greater immersion into the well means an increase in heat generation and a decrease in flow. The devices are manufactured in factories in Russia and China, the warranty from the manufacturer is 12 months.

BELAMOS TF3-60

4. Elpumps BP 1/4

Excellent model, the scope of which is limited to a small limit of permissible well depth of 10 meters. The pump has a multi-stage water supply, a good heat removal system, provides a flow of 3 cubic meters per hour. With a power consumption of 1300 W, the pump provides a pressure up to 55 m.

The pump, as stated by user reviews, is different reliability, easy maintenance. Its pressure is enough for a multi-storey building, but the performance is at the level of consumption of the average family.

Elpumps BP 1/4

3. JELEX Water cannon PROF 110/110

Attractive model with automatics, it is distinguished by stable operation of the engine and water supply from the well up to 30 meters, without pressure surges, even with abrupt fluid withdrawal from the consumer. The device can supply water (pressure) to 110 m, consumes 2.2 kW of power, has a flow of 6.6 cubic meters per hour.

Another advantage of this pump - own electronic control system. Due to the presence of a smooth start and normalization of power, energy consumption drops dramatically over a long period of time, reliability increases. At the same time, the cost of the model is acceptable for most owners, and the allowable depth of the well satisfies the needs of a huge audience.

JELEX Water cannon PROF 110/110

2. Aquarius BTsPE 0.5-32U

The model of the domestic manufacturer, equipped with a good automatic control, dramatically raising efficiency and energy efficiency. Product made from environmentally friendly materialsAll parts in contact with water are stainless steel and brass. The pump delivers 3.6 cubic meters per hour, consumes 820 W, can work in water up to 35 degrees and delivers water at 47 meters.

The main drawback that users point out is the drop in performance when the power strikes the network. This is how the internal electronic control system of the engine reacts to the instability of parameters. However, the rest of the reviews indicate high reliability, the optimal combination of cost and functional charge.

Aquarius BTsPE 0.5-32U

1. DAB MICRA HS 302 - 6

A very expensive device with features that fully justify the price tag. The feature of this pump is enclosed in thoughtful design, the ability to solve specialized tasks. The device can work in a well with a depth of up to 70 m, provides a pressure of 60 m, consumes 1600 watts of energy, the flow is 2 cubic meters per hour.

The model is able to lead the rating of submersible pumps by level. use of modern materials. Both stainless steel and bronze and technopolymers of several groups are used in the construction.

This pump with automation, its own regulation and protection systems can be used to extract water in a limestone layer. As stated by user reviews, fails very rarely, has the highest durability.

DAB MICRA HS 302 - 6

Top Well Pumps

When water is supplied from a well, a number of special requirements are imposed on the pump used:

• the device should be located at a certain height from the bottom of the aquifer;
• the pump must operate in conditions of insufficient source performance, including - with incomplete immersion in water;
• have lower requirements for heat dissipation.

At the same time with these requirements, for well pumps the shape and dimensions of the body are less important. Therefore, there was a very specific type of engineering solution. The best submersible pumps for wells with bottom water inlets, in free-form housings, they offer for comparable money a greater productivity, but a smaller maximum pressure in comparison with borehole models.

5. Trickle-Technopribor 1 and Kid-M BV from Livgidromash

Two models of pumps, which are inaccessible leaders in terms of recognition, price, popularity with consumers.

Submersible pump trickle-Technopribor 1

The devices have very similar characteristics (the first indicator is the Kid, the second in brackets is the Stream): productivity is 1500 (1050) liters per hour, head up to 60 m, 240 (255) watts of consumption, can be used in a water layer at least 400 mm thick.

Both devices can operate with a liquid temperature up to 35 degrees, have overheating protection, top water intake. Their price satisfies a huge audience of consumers, the level of reliability is high, and the repair is not difficult.

Submersible pump Malysh-M BV

Kid-M BV from Livgidromash

4. VMtec AQUA VES 3/5 MA

The representative of a few class of pumps capable of work at negative temperatures. The device is simple, reliable, able to work in dirty water. The pump provides a pressure of 56 m, a supply of 4.5 cubic meters per hour, consumes 750 W and can be operated at temperatures from -5 to 40 degrees.

The owners of this model emphasize low noise, and also high reliability even at permanent job, in case of water use for irrigation of large areas.

VMtec AQUA VES 3/5 MA

3. Grundfos SB 3-45 M

A representative of pumps, the capabilities of which exceed the average needs of potential owners. The device is different high price, however, its performance and functional charge fully justify the cost. The pump can operate at a depth of up to 10 meters, provides a pressure of 45 m, supplies 3 cubic meters of water per hour, consumes only 1050 W, has its own filter of impurities, automatic protection and regulation.

The model has proven durability and reliability. No maintenance required can provide water to a two-story building. No additional equipment is required.

However, the manufacturer notes that with intensive sampling at the productivity border, it is recommended to install a hydroaccumulator without its own pressure switch for comfortable use of water in a two-story house.

Grundfos SB 3-45 M

2. JELEX Water cannon PROF 55/35 A

The pump, which is distinguished not only by its high reliability, but also by its simple construction, availability of spare parts and extensive service network manufacturer. It can operate at a depth of 30 meters, delivers up to 3.3 cubic meters of water per hour, consumes only 460 watts of power.

Reviews of this model clearly indicate: the pump is quiet, easy to maintain, highly reliable. Consumers are particularly attracted by a serious feed rate with low energy consumption.

JELEX Water cannon PROF 55/35 A

1. DAB Pumps Divertron 1000 M

Well pump, named the leader in terms of cost and performance. This model with automatics will provide easy water supply from a wellliterally setting one switch. It consumes 900 watts of power, supplies water to 36 meters, can change performance (from 0.6 to 5.7 cubic meters per hour), and is equipped with automatic regulation.

For DAB DIVERTRON 1000 do not need a hydroaccumulator. The pump can be connected directly to the network input at home, automatically starting when water is taken. The device is characterized by simple maintenance, the ability to work in water with sand, in narrow mouths of wells, good power.

DAB Pumps Divertron 1000 M

Grundfos Unilift KP 150-A1- the best drainage pump for plumbing

In many regions, the well productivity or filling rate of the aquifer of the well is low for direct extraction by a submersible pump. The house is constantly lacking filing. In this case establish accumulative tank. The main pump supplies water from a well or a well almost constantly, with a small supply. It stops only by a float sensor signal when filling the tank.

A submersible drainage pump is used to supply the house with water. It is mounted in a storage tank, supplying water under controlled pressure to the pipeline network. One of the popular models of such a device is Grundfos Unilift KP 150-A1. This pump is capable of delivering up to 9 cubic meters of water per hour, creates a pressure of 5.5 meters, it is allowed to dive up to 10 meters. At the same time, the unit consumes only 300 watts.

Grundfos Unilift KP 150-A1

Conclusion

The devices listed in the rating are characterized not only by excellent technical indicators.All of them are from manufacturers with an extensive service network, offering easily accessible spare parts. Therefore, choosing one of the models listed pumps, you can organize a reliable, stable and efficient water supply system of a private house, cottage, cottage.